ChibiOS Free Embedded RTOS

Posted: **Fri Jul 08, 2016 8:25 pm**

In order to get hal_stm32_ltdc to build with my new project, i need to apply the following patch. thought i'd share!

Is this where I should be submitting patches?

Thanks,
Woody

Code: Select all

--- a/community/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.c   2016-04-30 02:47:37.000000000 -0400
+++ b/community/os/hal/ports/STM32/LLD/LTDCv1/hal_stm32_ltdc.c   2016-07-08 15:21:40.187610167 -0400
@@ -173,7 +173,7 @@
     if (ltdcp->thread != NULL) {
       tp = ltdcp->thread;
       ltdcp->thread = NULL;
-      tp->u.rdymsg = MSG_OK;
+      tp->p_u.rdymsg = MSG_OK;
       chSchReadyI(tp);
     }
 #endif  /* LTDC_USE_WAIT */

Posted: **Fri Jul 08, 2016 11:38 pm**

Hi,

You can post patches here or make a pull request on the community repository.

Note that your patch seems to be meant for ChibiOS RT 3.x stable, the code on the repository is correct for ChibiOS RT 4.x currently on the trunk and next to be released. I am not sure it should be accepted, you will be fine after updating to 4.x.

Giovanni

Posted: **Mon Jul 11, 2016 1:04 pm**

Giovanni,

I'll take a look at 4.x; i've been using 3 stable for a bit now.

If i have patches in the future, i'll rebase against the head of the repo and make a pull request.

Thanks for Chibios and all of your great work!

-Woody

ChibiOS Free Embedded RTOS

hal_stm32_ltdc patch

hal_stm32_ltdc patch

Re: hal_stm32_ltdc patch

Re: hal_stm32_ltdc patch