Page 1 of 1

Typo problem in os/hal/ports/STM32/LLD/USARTv2/hal_serial_lld.c

Posted: Thu Jan 12, 2017 5:47 pm
by brobwind
Dear Giovanni,
I found a typo problem in https://github.com/ChibiOS/ChibiOS/blob ... rial_lld.c @ 7e20b99
Line 461: "brief USART2 interrupt handler."
Should be something like "brief USART3-8 shared interrupt handler."

Thank you.

Best Regards,

----------------------------------------------------------------
#if defined(STM32_USART3_8_HANDLER)
#if STM32_SERIAL_USE_USART3 || STM32_SERIAL_USE_UART4 || \
STM32_SERIAL_USE_UART5 || STM32_SERIAL_USE_USART6 || \
STM32_SERIAL_USE_UART7 || STM32_SERIAL_USE_UART8 || defined(__DOXYGEN__)
/**
* @brief USART2 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_USART3_8_HANDLER) {

Re: Typo problem in os/hal/ports/STM32/LLD/USARTv2/hal_serial_lld.c

Posted: Thu Jan 12, 2017 6:18 pm
by Giovanni
Hi,

Fixed, thanks for finding.

Giovanni