[PATCH] Added defines for STM32F4x3 CAN3

Use this forum for requesting small changes in ChibiOS. Large changes should be discussed in the development forum. This forum is NOT for support.
Post Reply
alexander.guy
Posts: 1
Joined: Fri Mar 29, 2019 10:21 pm

[PATCH] Added defines for STM32F4x3 CAN3

Post by alexander.guy »

I ran into some missing defines while working on my STM32F413, which has support for a third CAN interface. Hopefully the formatting is right. Please let me know if anything needs to be tweaked.
Attachments
stm32f4x3-can3-defines.zip
(963 Bytes) Downloaded 473 times
Top
Post Reply

Return to “Small Change Requests”