Page 1 of 1
Stm32f769l can't upload and debug
Posted: Sun Oct 20, 2019 5:24 am
by asdasd
Hello ,
I have started to use stm32f769l discovery kit with chibistudio 20 ,but i have some problem in loading the demo application in it.
First of all i have connect to the board and there is no error ,but when i want to debug and run it, shows me sum errors
Error:can't add breakpoint :unknown reason
Error: jtag status contains invalid mode value
The firmware of the st-link is V2.J32.M22
and how can l change debugging to swd
Asd, thanks
Re: Stm32f769l can't upload and debug
Posted: Sun Oct 20, 2019 6:38 am
by Giovanni
Hi,
Could you update to version 21?
https://osdn.net/projects/chibios/releases/I think there was a problem with OpenOCD script for the F7 on version 20.
Giovanni
Re: Stm32f769l can't upload and debug
Posted: Sun Oct 20, 2019 7:19 am
by asdasd
I have updated but the problem still appear .
Re: Stm32f769l can't upload and debug
Posted: Sun Oct 20, 2019 8:54 am
by steved
I'm using the STM32F767 Nucleo, and have a vague recollection that I had to do something to make it work after a Chibi update. Can't find it here; will have a look at work tomorrow.
Re: Stm32f769l can't upload and debug
Posted: Sun Oct 20, 2019 4:39 pm
by RoccoMarco
Hey there, the problem was with OpenOCD. You should manually update OpenOCD:
delete the folder from c:\chibistudio\tools\openocd
unzip the new version in here
https://www.playembedded.org/blog/wp-co ... 19-7-6.zipPay attention to preserve the folder hierarchy
Re: Stm32f769l can't upload and debug
Posted: Wed Oct 23, 2019 8:44 am
by RadaR
RoccoMarco wrote:Hey there, the problem was with OpenOCD. You should manually update OpenOCD:
delete the folder from c:\chibistudio\tools\openocd
unzip the new version in here
https://www.playembedded.org/blog/wp-co ... 19-7-6.zipPay attention to preserve the folder hierarchy
Thanks. this help me.
I think need to update ChibiStudio. because this problem is mass