Page 1 of 1

CycloneTCP/IP Stack as External Resource

Posted: Mon Feb 03, 2020 11:45 am
by psavr
CycloneTCP is a full featured TCP/IP Stack much comprehensive as LwIp, available also as open source.
=> https://www.oryx-embedded.com/products/CycloneTCP

Is it possible to add CycloneTCP as External Resource or at least to add an example project with proper ChibiOS <=> CyclonTCP integration?
Note: There are lots of demos within the opensource download package most using FreeRTOS...

Re: CycloneTCP/IP Stack as External Resource

Posted: Mon Feb 03, 2020 1:36 pm
by Giovanni
Hi,

I will add as external resource for sure, it also supports ChibiOS out of the box. Never tried it, any experience to share?

Giovanni

Re: CycloneTCP/IP Stack as External Resource

Posted: Mon Feb 03, 2020 2:56 pm
by psavr
>> any experience to share?

Not yet. I compiled some demos, this works out of the box. But I couldn't figure out how to merge their makefile with the Chibios makfile. I guess the way would be to setup the propper binding in \os\various ? But maybe I was searching too far..

Re: CycloneTCP/IP Stack as External Resource

Posted: Mon Feb 03, 2020 3:15 pm
by Giovanni
A .mk could be created starting from their makefile, basically you just need the list of required files and directories.

Giovanni