Hello,
I'm brand new to ChibiOS and STM32. I have a project that wants to use the STM32H750 chip and I'm looking into running ChibiOS on it and I saw that this chip is not yet supported in ChibiOS. Any tips on how to go about creating the necessary board files?
Thanks!
Ed
Support for STM32H750
Moderator: RoccoMarco
-
Giovanni
- Site Admin
- Posts: 14893
- Joined: Wed May 27, 2009 8:48 am
- Has thanked: 1202 times
- Been thanked: 997 times
Re: Support for STM32H750
Hi,
Start from an STM32H743 demo.
- Modify mcuconf.h and put the H750 identifier in it, you may remove peripherals not present on the H750 too.
- Clone an H743 board.
- Edit board.chcfg with your board settings. Regenerate the board files using ChibiStudio, there is a playembedded video covering this: https://www.youtube.com/watch?v=HwJqZfITvV0
- Modify the makefile to include the new board.
Giovanni
Start from an STM32H743 demo.
- Modify mcuconf.h and put the H750 identifier in it, you may remove peripherals not present on the H750 too.
- Clone an H743 board.
- Edit board.chcfg with your board settings. Regenerate the board files using ChibiStudio, there is a playembedded video covering this: https://www.youtube.com/watch?v=HwJqZfITvV0
- Modify the makefile to include the new board.
Giovanni