STM32H7xx Missing CRC
Posted: Mon Nov 23, 2020 12:09 am
Hi there,
it seems that the CRC enable, disable and reset macros are missing.
Please insert, add following lines to the RCC helper driver header:
Thanks and kind regards,
Peter.
it seems that the CRC enable, disable and reset macros are missing.
Please insert, add following lines to the RCC helper driver header:
Code: Select all
/**
* @name CRC peripheral specific RCC operations
* @{
*/
/**
* @brief Enables the CRC peripheral clock.
*
* @param[in] lp low power enable flag
*
* @api
*/
#define rccEnableCRC(lp) rccEnableAHB4(RCC_AHB4ENR_CRCEN, lp)
/**
* @brief Disables the CRC peripheral clock.
*
* @api
*/
#define rccDisableCRC() rccDisableAHB4(RCC_AHB4ENR_CRCEN)
/**
* @brief Resets the CRC peripheral.
*
* @api
*/
#define rccResetCRC() rccResetAHB4(RCC_AHB4RSTR_CRCRST)
/** @} */
Thanks and kind regards,
Peter.