ChibiOS Free Embedded RTOS

Hello Team,

We want to create a project in chibi studio for our custom board. We don't want to import a demo project into user_workspace and proceed from there.
All the things we want to have a scratch new blank project with hello world for our target board.

Can anyone help me to do so.

Hi,

This is usually done by cloning one of the existing projects. Have you seen the video guides on www.playembedded.org?

Giovanni

Hello Sir,

I have seen the video and read the article guide on play embedded on how to create a new project.
It is like we have to import existing demo and than copy pest with new name.

But my concern is how I will create a new project from scratch without importing a existing one.

IN demo folder for stm32 there is no project for "STM32F779" in this case how i will proceed further.
Can't I create a make file project and provide the tool chain, if so than where is the tool chain location will in in chibistudio ?

Hi,

You need to create an Eclipse project File->New->Makefile Project with Existing Code

Then point it to your makefile project directory, this creates the project, all the settings to be applied then are up to you (this is why it is easier to duplicate one), see the Eclipse CDT documentation.

Giovanni

Hello Sir,

I have followed the steps like "File->New->Makefile Project with Existing Code" to create a new makefile project ("hello_world_makefile_project") but where did it saved in folder not known.
I mean i have search through out the system but could not find it.

You need to specify a folder with an existing makefile project.

It does not create a project, it adds Eclipse metadata to an existing makefile project (it adds .project .cproject files).

Giovanni

Hello Sir,

It has created .cproject and .project meta data files but there is no option for build this project.

Can you please help us to create a nominal project from scratch with only a main.cpp file and make file.

From here we want to start my project.

Hi,

There is no option to create a new project automatically, you can either:
- Clone an existing project then perform the changes you need.
- Create manually a makefile project and then import it using the procedure I wrote above.

Giovanni