ChibiOS Free Embedded RTOS

I have got serial, LED blinky and shell working on the STM32H573I-DK.

But when I add in SDC I have a problem. In 'hal_lld.c':

[font=Courier New]/**
* @brief SDMMC1 clock frequency.
*/
#if (STM32_SDMMC1SEL == STM32_SDMMC1SEL_PLL1Q) || defined(__DOXYGEN__)
#define STM32_SDMMC1CLK hal_lld_get_clock_point(CLK_PLL1QCLK)[/font]

The compiler says:

[font=Courier New]In file included from ../../../os/hal/include/hal.h:249,
from ../../../os/hal/src/hal_buffers.c:41:
../../../os/hal/ports/STM32/STM32H5xx/hal_lld.h:3252:37: warning: "hal_lld_get_clock_point" is not defined, evaluates to 0 [-Wundef]
3252 | #define STM32_SDMMC1CLK hal_lld_get_clock_point(CLK_PLL1QCLK)[/font]

Yet hal_lld_get_clock_point() is already in use for other peripherals.

Any ideas? Suggestions? Thanks!

Hi,

Moving this in "bug reports", will give a look ASAP.

Note that the H5 port is still work in progress, there could be small problems here and there.

Giovanni

bump

Apparently this problem has already been fixed, closing.

Giovanni