ChibiOS Free Embedded RTOS

Hi
having looked at the demo, wondering why the NUCLEO-L4R5ZI demo did not implement OTG test app like alot of the demos do ?

Is OTG supported on STM32L4R5ZI ?

Hi,

It is supported by the demo under /testhal/STM32/multi/USB_CDC

Giovanni

So i'm running up the

RT-STM32L4R5ZI-NUCLEO144 example

using target\stm32l4x.cfg for the ST-LINK

It runs but the debugging seems flakey, does not run and stop at main as it is setup to, it stops nvicInit() ??

I've fixed it, need to set optimization to -O0

This is quite common, you may also try -Og which is specific for debug.

Giovanni

Using /testhal/STM32/multi/USB_CDC

it seems to be working, but for some reason when the shell first start and you press CR for promt you never see the shell start info

i.e. chprintf(chp, "ChibiOS/RT Shell" SHELL_NEWLINE_STR);

Hi,

It also happens withe USB driver, I think it is the host discarding incoming data if the virtual com port is not yet opened by any process. You may try putting a delay before spawning the shell and opening a terminal before the shell spawns.

Giovanni