ChibiOS Free Embedded RTOS

Instead of polling via GPIO I ended up sending an empty requests using DMA and have callback check for `0xFF` in Rx buffer which shows the device is free . This ended up being the easiest option

Hi Forum,

I am trying to use CException library in Chibi OS application to implement the " try, throw and catch " pattern. Have anyone tried this? The library seems to be compact and offers multithreading support as well. Is there a reason why we are not using it in Chibi OS? Are ``setjmp`` and ...

Thanks Giovanni. I shall explore that

Regards,

Akshai

Hi Giovanni,

Thank you for the reply. Unfortunately, I cannot wait as it will kill the timings. Is there a possibility for an asynchronous way to do it?

Regards,

Akshai

Hi Team,

I am trying to implement a driver using SPI for the ADBMS1818 chip which is used to measure the Cell voltages of battery cells. To start measuring the voltage using the ADC . I have to do a start poll operation (PLADC). After which I shall use another command to read the ADC values (say ...

Thanks, Giovanni . I shall do that.

Also, do you think it's okay to set up the LD Script to zero sections in `ram0` as well? Does it add any overhead? I expect the startup timing could be stretched a bit. Any particular reason why you did not zero it?

Regards,

Akshai M

Thanks, Patrick and Giovanni.

Change from `DATA_RAM` to `.ram0_clear` did the trick

Also, I tried changing the `CH_CFG_MEMCORE_SIZE`, but still, as Patrick already pointed out the `ramo` utilization stays at 100%. Any suggestion on how to make it print the right amount being used?

Regards ...

Hi Forum,

I have a strange issue. I am using STM32F767ZIT6 micro controller for my project. Since I ran out of space in ram3 , I tried to use `ram0` using the __attribute__((section("DATA_RAM"))) . `DATA_RAM` alias is defined in `ARMCMx/compilers/GCC/ld/STM32F76xxI.ld` .

I then declared a "global ...

Hi Team,

From forums I have noticed that ChibiOS use C99 standard however I have noticed AVR arch making use of C11( os/common/ports/AVR/compilers/GCC/rules.mk line 62 says CSTANDARD = -std=gnu11 .

My doubt is whether it's okay to mix C99 and C11 code?

Regards,

Aksha M

Hi Giovanni,

I was able to make the EFL work by booting from different banks. It seems like an issue with the non-continuous page indexes used by the chip. Writing with offsets works but sector/page operations would result in an error. I should be able to push a hotfix soon. But how do I contribute ...