ChibiOS Free Embedded RTOS

Giovanni,

Is there some documentation that you can point us to on the best way to do
pin configuration management. I am hand editing the board.h file to enable
/ disable pins for my code but not all the pins are defined in board.h. i.e.
For my STM32F4 discovery board, there was a board.h but the ...

Grazie Giovanni, that was the issue..

I have a STM32F4 Discovery board that is attached to one of these expansion boards you can get on EBay, the Open407V-D, and my code is based off of the ARMCM4-STM32F407-LWIP-FATFS-USB demo project.

On startup I init the SDC stack and register my events with
sdcStart(&SDCD1, &sdccfg);
tmr_init ...

Is it possible/practical to enable C++ Exception handling support using the
Yagarto toolchain or does it just add too much overhead ?

I have a C++ library that I want to incorporate into my project but any throw()
call winds up in the unhandled exception function and not in the catch block.

I ...

I totally missed the USB-CDC in testhal.. To answer your question, yes I can compile and run that code just fine which is what I was looking for..
I still get the linker with your Github project, the only differences I found in the Makefile's were
USE_FPU = no
the include $(CHIBIOS)/test/test.mk is ...

Hi,

I am trying to compile this project but I am getting a link error missing the syscalls stubs..
I found another article pointing to a stubs project on github but it appears to be a dead project.
Are there any other pointers out there to code / settings that will satisfy the linker error ?

Thank ...

I now notice that the standard C/C++ run configuration hangs because st-util terminates
after the load command so it's waiting for a response from st-link from the run command.
My gdbinit is as follows.

file build/ch.elf
br main
target extended-remote 127.0.0.1:4242
load

load works, then st-util ...

Wow I did not expect that to work.. SF only has 4.6.2 for the Mac as a download so I gave it a try
and it worked under Eclipse using the Zylin native CDT GDB connector.. The standard default C/C++
application run configuration sill fails..

4.7.1 works, it just doesn't work using the Zylin Native ...

Interestingly I would of sworn this problem was the same with the command line version of GBD but after
re-reading the texane page, I saw that I needed to specify the target with extended-remote and not just
remote. This gave me the kill and run commands, now the command line works just fine and it ...

Forgot to mention this is on a STM32 F4 Discovery board, running the vanilla board demo code