ChibiOS Free Embedded RTOS

Thank you Giovanni for the prompt response and thank you for ChibiOS. I used the validator and added the pins and ports that are not really used in the Black Pill, I thought unused pins could be left out. If I wanted to contribute the file, what steps are necessary?


Any news about the black pill ...

Ok, I managed to generate my new board file using the board.chcfg file of the STM32f4_DISCOVERY.

I've also seen that there is a board.fmpp, if I understand correctly is used to generate the chcfg file... But I didn't understand how to do it.
Where can I find reference guide for chibistudio? In the ...

Dear all,

After a long time, I came back to embedded development/Chibios.
I opened again the old code of my old project, and I wanted to port it from Chibios 2.4.3 to Chibios 20.3.

I was aware of the changes, particularly during the transition to Chibios 3 (if I'm not wrong), that changed some ...

Boris, I have the same problems in Linux debugging... look here
http://forum.chibios.org/phpbb/viewtopic.php?f=8&t=211&start=60#p9238

thank you for answering
I don't think we have the same problem...
At the beginning, i thought that it was a toolchain problem, but the toolchain is working either ...

Only if you enabled CORTEX_ENABLE_WFI_IDLE=TRUE somewhere, the option is not even available in configuration files.

Giovanni

Obviously, you were right.

CORTEX_ENABLE_WFI_IDLE is correctly set to false.

so, i've tryed to comment all my code, leaving just a infinite loop and
halInit();
chSysInit ...

WFI is not enabled by default in ChibiOS demos so it is not your problem.

Giovanni

there is a possibility that I've enabled it by mistake? how can i check it?
I'm not an expert like you, but the behaviour of my project& debugger, looks like the problem is the one reported... I've no any ideas ...

Sorry for double-posting...

I was trying to copy the configuration without success, so, i start thinking if that was an openocd issue.
So i tryed to import my project in the ChibiStudio workspace, copied one of the default configuration, modifying only the configuration name & project.

when i ...

You have to select the project (click on it) then launch OpenOCD from the external tools menu.

Folowing extactly your instruction worked. A bit strange behaviour for an eclipse launcher, however
Personally i think that if I click again the flash & run configuration, the launcher shuold work ...

ChibiStudio is a normal Eclipse Juno, you can also do Java etc.

Giovanni

I know, but ther's not a Debian repo of ChibiStudio xD
I'm a bit "closed" about this stuff...

however I've tried ChibiStudio, the first time it shows the same problems I've already noticed with my configuration, but then ...

Hi,

Don't worry about the bad English, it can't be worse than mine.


it can be much worse xD


OpenOCD can be problematic at times but I never experienced problems like the ones you reported, probably there is something wrong with your debug configuration.
Did you give ChibiStudio a try? it is ...