I will see if it is possible without break other things, we are close to 2.6.0.
Giovanni
STM32F405 TIM9 through TIM14
Moderator: RoccoMarco
-
Giovanni
- Site Admin
- Posts: 14891
- Joined: Wed May 27, 2009 8:48 am
- Has thanked: 1202 times
- Been thanked: 996 times
-
Giovanni
- Site Admin
- Posts: 14891
- Joined: Wed May 27, 2009 8:48 am
- Has thanked: 1202 times
- Been thanked: 996 times
Re: STM32F405 TIM9 through TIM14
Hi,
I added ICUD9 but I could only test compile it. Please report about about functionality.
Giovanni
I added ICUD9 but I could only test compile it. Please report about about functionality.
Giovanni
Re: STM32F405 TIM9 through TIM14
Thanks a lot,
i 'll test it and report on monday morning, i have not the autopilot under the hands during week end
EDIT1: I have copied STM32F4xx/PWM-ICU and modify it to test ICU9 on both channel 1 and 2 (pa2, pa3) on a discovery F4 board, and it works !
again, thanks for the speed of your reactivity !
Alexandre
i 'll test it and report on monday morning, i have not the autopilot under the hands during week end
EDIT1: I have copied STM32F4xx/PWM-ICU and modify it to test ICU9 on both channel 1 and 2 (pa2, pa3) on a discovery F4 board, and it works !
again, thanks for the speed of your reactivity !
Alexandre