A minor bug for STM32F3x and STM32F3 Board UART example

[joedalton]

Hi, i 'm a newbie to ChibiOS, and just run a UART example for STM32F3 Discovery Board, and i found a minor bug on this:
In the main.c , at USART1 configuartion:

Code: Select all

 /*
   * Activates the serial driver 1 using the driver default configuration.
   * PA9(TX) and PA10(RX) are routed to USART1.
   */
  sdStart(&SD1, NULL);
  palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7));
  palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7));

but for STM32F30x, PC4(TX) and PC5(RX) are routed to USART1, PA2(TX) and PA3(RX) routed to USART2, PB10(TX) and PB11(RX) routed to USART3. I 've fixed it and it run like a charm

[Giovanni]

Hi,

Have fun with ChibiOS

Both PA9/PA10 and PC4/PC5 (and also PE0/PE1) can be used, the STM32 GPIO allows to map peripherals to multiple sets of pins.

The matter is described in tables 11-17 of the F3 DataSheet.

Giovanni

[joedalton]

Wow, thanks. It 's my bug