PAL macro define

[tfAteba]

Hi Giovanni,

I have a simple question about the implementation of the pal low level driver header file, where you made the define of GPIO register.

PAL_STM32_PUDR_* is the only one that does not have the same name as the register on the reference manual.
I expected to read PAL_STM32_PUPDR_* for the pull-up/pull-down register selection.

Of course it is not so important to have the same name but all the other registers are define like in the reference manual.

Theo.

[Giovanni]

Hi,

I will look into this, if it does not break compatibility.

Giovanni

[Giovanni]

Fixed in repository.

Giovanni