is it possible to add the linker script file of the STM32F407xE? This controller has just a 512kByte flash instead of 1MByte.
Short proposal:
Code: Select all
/*
* STM32F407xE memory setup.
* Note: Use of ram1 and ram2 is mutually exclusive with use of ram0.
*/
MEMORY
{
flash : org = 0x08000000, len = 512k
ram0 : org = 0x20000000, len = 128k /* SRAM1 + SRAM2 */
ram1 : org = 0x20000000, len = 112k /* SRAM1 */
ram2 : org = 0x2001C000, len = 16k /* SRAM2 */
ram3 : org = 0x00000000, len = 0
ram4 : org = 0x10000000, len = 64k /* CCM SRAM */
ram5 : org = 0x40024000, len = 4k /* BCKP SRAM */
ram6 : org = 0x00000000, len = 0
ram7 : org = 0x00000000, len = 0
}
