Hi,
I use softwer UNI/O protocol. I need to disable all interrupts (including OS interrupts) except to interrupt TIM3. And later, enable back. How can I do it at ChibiOS?
STM32F429 interrupt
Moderator: RoccoMarco
-
Shevchenko
- Posts: 11
- Joined: Tue Nov 13, 2018 9:25 am
- Has thanked: 1 time
- Been thanked: 3 times
-
Giovanni
- Site Admin
- Posts: 14893
- Joined: Wed May 27, 2009 8:48 am
- Has thanked: 1202 times
- Been thanked: 997 times
Re: STM32F429 interrupt
hi,
You could put TIM3 IRQ priority at maximum, other IRQs would not interfere with it.
If you need to disable other interrupts there is no other way except to disable the sources one by one operating on NVIC.
Giovanni
You could put TIM3 IRQ priority at maximum, other IRQs would not interfere with it.
If you need to disable other interrupts there is no other way except to disable the sources one by one operating on NVIC.
Giovanni