HI,
I read on the supported architecture and devices that Chibios supports ARM Cortex-m0 architecture on device LPC11xx.
I am working on a project and I will use LPC11U24FBD64 which is one of LPC11U2x microcontrollers from NXP which is also Cortex-m0 device.
Kindly tell me will chibios support this chip or I will need to port it to this chip?
Best Regards.
Handaza
ARM Cortex-M0 NXP LPC11U2x Support
Moderators: RoccoMarco, lbednarz, tfAteba
-
Giovanni
- Site Admin
- Posts: 14891
- Joined: Wed May 27, 2009 8:48 am
- Has thanked: 1202 times
- Been thanked: 996 times
Re: ARM Cortex-M0 NXP LPC11U2x Support
Hi,
The kernel supports any Cortex-M device so there is no need to port it. The HAL (device drivers) could need small changes, I have to verify on the manuals if peripherals are similar.
"Supported" in manly matter of "tested on", support requires real hardware for tests.
Giovanni
The kernel supports any Cortex-M device so there is no need to port it. The HAL (device drivers) could need small changes, I have to verify on the manuals if peripherals are similar.
"Supported" in manly matter of "tested on", support requires real hardware for tests.
Giovanni