My application needed a PWM using TIM13 on an STM32, so I added the missing code for this.
I tested the changes on a Nucleo F767 board.
Note: my patch may be in the incorrect format, since I use a custom git mirror.
Added support for PWM13 on STM32 Topic is solved
-
Dirtcrusher
- Posts: 2
- Joined: Mon Sep 09, 2019 2:29 pm
- Has thanked: 2 times
- Been thanked: 2 times
-
Giovanni
- Site Admin
- Posts: 14892
- Joined: Wed May 27, 2009 8:48 am
- Has thanked: 1202 times
- Been thanked: 996 times