Stm32f769l can't upload and debug Topic is solved

[asdasd]

Hello ,
I have started to use stm32f769l discovery kit with chibistudio 20 ,but i have some problem in loading the demo application in it.
First of all i have connect to the board and there is no error ,but when i want to debug and run it, shows me sum errors

Error:can't add breakpoint :unknown reason
Error: jtag status contains invalid mode value

The firmware of the st-link is V2.J32.M22
and how can l change debugging to swd
Asd, thanks

[Giovanni]

Hi,

Could you update to version 21?

https://osdn.net/projects/chibios/releases/

I think there was a problem with OpenOCD script for the F7 on version 20.

Giovanni

[asdasd]

Hi,

Could you update to version 21?

https://osdn.net/projects/chibios/releases/

I think there was a problem with OpenOCD script for the F7 on version 20.

Giovanni

I have updated but the problem still appear .

[steved]

I'm using the STM32F767 Nucleo, and have a vague recollection that I had to do something to make it work after a Chibi update. Can't find it here; will have a look at work tomorrow.

[RoccoMarco]

Hey there, the problem was with OpenOCD. You should manually update OpenOCD:
delete the folder from c:\chibistudio\tools\openocd
unzip the new version in here
https://www.playembedded.org/blog/wp-co ... 19-7-6.zip

Pay attention to preserve the folder hierarchy

[RadaR]

Hey there, the problem was with OpenOCD. You should manually update OpenOCD:
delete the folder from c:\chibistudio\tools\openocd
unzip the new version in here
https://www.playembedded.org/blog/wp-co ... 19-7-6.zip

Pay attention to preserve the folder hierarchy

Thanks. this help me.

I think need to update ChibiStudio. because this problem is mass