I'm thinking about using the stm32u3 for a project. In looking at the hal/ports/.../platform.mk it seems the rtc driver is commented out. This made me wonder about the current state of this port and whether the RTC driver is a work in progress.
Geoffrey
stm32u3 rtc
Moderator: RoccoMarco
-
geoffrey.brown
- Posts: 122
- Joined: Thu May 07, 2015 9:47 pm
- Has thanked: 3 times
- Been thanked: 18 times
-
Giovanni
- Site Admin
- Posts: 14891
- Joined: Wed May 27, 2009 8:48 am
- Has thanked: 1202 times
- Been thanked: 996 times
-
geoffrey.brown
- Posts: 122
- Joined: Thu May 07, 2015 9:47 pm
- Has thanked: 3 times
- Been thanked: 18 times
-
geoffrey.brown
- Posts: 122
- Joined: Thu May 07, 2015 9:47 pm
- Has thanked: 3 times
- Been thanked: 18 times
Re: stm32u3 rtc
Just wondering what's working and what isn't. Trying to decide between continuing with the stm32l432 or using the stm32U375 on my next board. The primary advantage to the U3 is lower power during execution. The disadvantages are experience, possible immaturity of the port, higher standby energy cost.
Geoffrey
Geoffrey
-
Giovanni
- Site Admin
- Posts: 14891
- Joined: Wed May 27, 2009 8:48 am
- Has thanked: 1202 times
- Been thanked: 996 times
Re: stm32u3 rtc
Hi,
The port is mostly complete, it is lacking testing but drivers are the same used in previous families.
Giovanni
The port is mostly complete, it is lacking testing but drivers are the same used in previous families.
Giovanni