STM32F1xx - serial terminal not working - needs tips

[mabl]

Hi frederic.leuba,

I just tried it out with the ARMCM3-STM32F107-LWIP demo on the RevB board and my board files. Everything works as expected...

Please make sure that

• You are using the Sub-D9 connector on the Olimex board. (Or are you using the Serial on the UEXT connector?)
• Enabled Serial 2 in mcuconf.h
• You have changed SD2 to SD3.

Serial Port 2 should be PD11 and PD12 if remapped.

Best,
MaBl

[frederic.leuba]

Hello all,

I confirm that everything works fine now.
Shame on me, I had forgotten to update the path to the REV_B board directory... now we have the serial console, the shell, fatfs, etc...

We compile, flashed and connected from windows, linux and macosX, it all works.
@MaBl: Thanks for your help.
@Giovanni: you can include REV_B in your source tree

Fred

[Giovanni]

Thanks, will do.

Giovanni

[mabl]

Giovanni, please remember also looking at Rev. A SD2 remapping. I think it is erroneously missing and Eth will fail if SD2 is enabled.