ChibiOS Free Embedded RTOS

Posted: **Tue Dec 15, 2020 11:28 am**

vrollei wrote:I have noticed new LLD/RCCv1 module, but it can not be used directly with STM32WL port without some modification.

Same with the WB port, I will look into this later.

Giovanni

Posted: **Wed Dec 16, 2020 1:22 am**

FYI CubeWL and the new WB55-NUCLEO now on ST site WL page...
https://www.st.com/en/microcontrollers- ... eries.html

Posted: **Wed Feb 17, 2021 2:05 am**

Hi,
Seeing as the WB55 is in (at a single core level at least) could the WL port into trunk be started now?
--
Bob

Posted: **Wed Feb 17, 2021 9:00 am**

Yes, which board should I get for this one?

Giovanni

Posted: **Wed Feb 17, 2021 9:19 am**

Posted: **Wed Feb 17, 2021 9:27 am**

NUCLEO-WL5JC board files and standard demo are in the archive.

Posted: **Wed Feb 17, 2021 11:44 am**

Would you also need a WLE5 based board for developing the single core?

Posted: **Wed Feb 17, 2021 12:16 pm**

This port is only for M4 core, it does not matter WL or WLE.
M0+ core needs additional port, I will do it later.

Posted: **Tue Apr 13, 2021 7:57 pm**

Hi,

just run rt_test_suite and oslib_test_suite on STM32WL55CC, all tests completed successfully.

Posted: **Wed Apr 14, 2021 8:53 am**

Hi Vitaly,
Is the earlier tar file the one that should be applied to trunk or do you now have an updated version?
--
Bob

STM32WLxx port