ChibiOS Free Embedded RTOS

tmanev wrote:I tried J-Link GDB. I do not know how to setup OpenOCD.

Todor

Hi Todor, I think I used this Config for my JLink EDU and the E407

Init Sequence wrote:

Code: Select all

monitor endian little
#monitor speed 12000
monitor flash device = STM32F407VC
monitor flash breakpoints = 1
monitor flash download = 1

Run Sequence wrote:

Code: Select all

tbreak main
monitor reset 0
continue

Thanks !

I got tired of Eclipse. Is there an IAR demo project for this ?

Best regards,
Todor

There is an IAR example project under ./demos/ARMCM4-STM32F407-DISCOVERY. It should be easily adapted, just copy the project files.

Giovanni

Thank you. I did it for couple of hours.

Todor

Hi, Giovanni
I did some tests with the lwip and fatfs together as a web server (files are read from the card and transmitted as web pages) but it looks extremely slow 1kB a second.
Do you have any idea why it is so slow ?

Best regards,
Todor

It depends, how data is read and written? in general small blocks hurt performance. Try to isolate the problem, first lwIP without FatFS then reversal.

Giovanni

Thank you Giovanni.

I will debug it. Btw, do you plan to do ChibiOS plugin for IAR so that I can trace the threads and the thread call stack?

Best regards,
Todor

Yes but it is not high-priority and cannot give a timeline.

Giovanni

Hi, Giovanni

I cannot figure out if the ETHERNET driver is using DMA or not? Do you know if it is with DMA if not do you plan to use it ?
Is there any samples of the usage of your DMA driver?

Best regards,
Todor