I found this, it is not ChibiOS-related but still interesting, a single chip game console with VGA output: http://bitboxconsole.blogspot.in/
I imagine it is done using a DMA writing on GPIOB but I haven't examined the code yet.
Giovanni
VGA with STM32
Moderator: RoccoMarco
- Giovanni
- Site Admin
- Posts: 14892
- Joined: Wed May 27, 2009 8:48 am
- Has thanked: 1202 times
- Been thanked: 996 times
Re: VGA with STM32
Wow, just think what you could do with a STM32F429Discovery with its big external RAM!! I wonder if the LCD would get in the way....
-John
-John
Re: VGA with STM32
Writing a VGA driver for the GDISP module of µGFX is actually on the ToDo list. I assume that this would be very useful. However it's ultra-low priority compared to other things on the ToDo list.
I got myself one of these. They have some very simple R2R-network to generate the analog voltages.
Without the required RAM, it's usually not fun to work with, because you can only write. Scrolling and other animations wouldn't be possible.
~ Tectu
I got myself one of these. They have some very simple R2R-network to generate the analog voltages.
Without the required RAM, it's usually not fun to work with, because you can only write. Scrolling and other animations wouldn't be possible.
~ Tectu
Re: VGA with STM32
Demosceners already got it - at full speed
Everything done with a cheap F4 Discovery board and a trivial VGA adapter (DAC)
[youtube]ymGCeG9_6c0[/youtube]
Source: http://www.pouet.net/prod.php?which=61197
[youtube]ymGCeG9_6c0[/youtube]
Source: http://www.pouet.net/prod.php?which=61197
- Giovanni
- Site Admin
- Posts: 14892
- Joined: Wed May 27, 2009 8:48 am
- Has thanked: 1202 times
- Been thanked: 996 times
Re: VGA with STM32
Well, that is impressive. Reminds me of the early farbrausch demos: http://www.farb-rausch.de/
Giovanni
Giovanni