Page 1 of 1

VGA with STM32

Posted: Wed Oct 02, 2013 4:17 pm
by Giovanni
I found this, it is not ChibiOS-related but still interesting, a single chip game console with VGA output: http://bitboxconsole.blogspot.in/

I imagine it is done using a DMA writing on GPIOB but I haven't examined the code yet.

Giovanni

Re: VGA with STM32

Posted: Wed Oct 02, 2013 4:33 pm
by jscott
Wow, just think what you could do with a STM32F429Discovery with its big external RAM!! I wonder if the LCD would get in the way....

-John

Re: VGA with STM32

Posted: Wed Oct 02, 2013 6:00 pm
by Tectu
Writing a VGA driver for the GDISP module of µGFX is actually on the ToDo list. I assume that this would be very useful. However it's ultra-low priority compared to other things on the ToDo list.
I got myself one of these. They have some very simple R2R-network to generate the analog voltages.
Without the required RAM, it's usually not fun to work with, because you can only write. Scrolling and other animations wouldn't be possible.


~ Tectu

Re: VGA with STM32

Posted: Mon Nov 11, 2013 11:14 am
by TexZK
Demosceners already got it - at full speed ;) Everything done with a cheap F4 Discovery board and a trivial VGA adapter (DAC)

[youtube]ymGCeG9_6c0[/youtube]

Source: http://www.pouet.net/prod.php?which=61197

Re: VGA with STM32

Posted: Mon Nov 11, 2013 1:22 pm
by Giovanni
Well, that is impressive. Reminds me of the early farbrausch demos: http://www.farb-rausch.de/

Giovanni