ChibiOS Free Embedded RTOS

Hello,

I am trying to work with MPL3115A2 (https://www.sparkfun.com/products/11084) barometric sensor with STM32F4 and Chibios 2.6.5
As per the datasheet this sensor requires repeated start I2C. I would like to know if this is supported by chibios. If not is there any way I can work around this to solve the issue?

--
Nikhil

Hi,

As far I know this dual address mode is not supported by the driver. You may try some I2C software implementation, it is not an application that requires high performance of the bus.

Giovanni

I interfaced this sensor to a STM32L1 some time ago and don't recall any issues.
The code here might be of some help to you: https://github.com/alanbarr/ChibiOS_Sensors/tree/master/MPL3115A2

Great! I will try it out.

Thanks

--
Nikhil

It worked as it is. One should use 7 bit Slave address.

Thanks

--
Nikhil