ChibiOS Free Embedded RTOS

Hi,
I am playing with STM32L4R5ZI nucleo 144 board. One thing that bug me out is that with ChibiOS 21.6.x USB is not working. I am using testhal/STM32/multi/USB_CDC example.
If I use 20.3.x stable - same example is working. I can not find any difference in the two projects. New features like dynamic clock are disabled, but boost is enabled ( which must not be a problem as CR5 register value for boost is same ), also clock configuration in two projects are same. What I can say is that with 21.6.x internal PULLUP is doing nothing (maybe hardware is not functioning correct). Any Ideas what to look at ?

edit: master is not working as well

Hi,

Please use 21.11.0. Version 21.6.0 has been discontinued.

Of course please report if you have the same problem with 21.11.0.

Giovanni

There is no 21.11.0 in GitHub, how to get it ?

edit: Found it

Same problem with 21.11.0

phusho wrote:Same problem with 21.11.0

Moving in bug reports, will look at this.

Giovanni

Hi,

Fixed as bug #1207.

You just need to change your mcuconf.h file this way:



Giovanni

Giovanni wrote:Hi,

Fixed as bug #1207.

You just need to change your mcuconf.h file this way:

Code: Select all

#define STM32_PWR_CR2                       (PWR_CR2_PLS_LEV0 | PWR_CR2_IOSV | PWR_CR2_USV)

Giovanni

Changes you made are working in commit I see that you have changed STM32_PLLSAI1N_VALUE to 72, It is working with previous settings also, according to configurator sheet you will have 48 MHz with 48 and STM32_PLLSAI1Q_VALUE=4. I have tested and it is working. Unless there are other complications.

Hi,

Those settings are equivalent, you can use the old or the new ones depending on other constraints if needed.

Giovanni