porting ChibiOS to STM32373C-EVAL

[madokapeng]

I am new to chibiOS,

I might need some guide to port chibiOS to STM32373C-eval board

I followed
http://www.chibios.org/dokuwiki/doku.ph ... _rt_how-to
but it is for STM32F4xx)

However, at the compile stage. It gives compilation error says:

.\os\hal\platforms\STM32\GPIOv2\pal_lld.h(158): error: #256: invalid redeclaration of type name "GPIO_TypeDef" (declared at line 573 of "C:\Keil\ARM\PACK\Keil\STM32F3xx_DFP\1.0.0\Device\Include\stm32f30x.h")
.\os\hal\include\serial.h(111): error: #5: cannot open source input file "serial_lld.h": No such file or directory

Please give some hints

Thank you in advance

[Giovanni]

Hi,

You don't need to port anything, a demo for that board is already included in ChibiOS: ARMCM4-STM32F373-STM32373C_EVAL.

Giovanni

[madokapeng]

Hi,

You don't need to port anything, a demo for that board is already included in ChibiOS: ARMCM4-STM32F373-STM32373C_EVAL.

Giovanni

I want to develop it in KEIL IDE. I do not see any demo using KEIL

Please guide me

Thank ou

[madokapeng]

Please how to porting chibiOS under KEIL IDE

Thanks in advance

[Giovanni]

Some of the demos have Keip project files, you can use those as examples.

Giovanni

[madokapeng]

Some of the demos have Keip project files, you can use those as examples.

Giovanni

is that for stm32373C-EVAL project?

I could not find any

[madokapeng]

Giovanni,

Thank you for your quick response. However, I am quite new to chibiOS. I need some information more details.

Please someone can give me a guide.

what documents I should look at?

I found most of demo project is not keil. there is only a few has keil project.

there is a folder under os/port/, called RVCT. what is RVCT? Is this used for keil?

Thanks in advance

[Giovanni]

Hi,

Yes, RVCT is Keil.

The available documentation is on the web site here: http://www.chibios.org/dokuwiki/doku.ph ... :documents
The main document is the general documentation here: http://chibios.sourceforge.net/html/index.html

Giovanni

[madokapeng]

Hi,

Yes, RVCT is Keil.

The available documentation is on the web site here: http://www.chibios.org/dokuwiki/doku.ph ... :documents
The main document is the general documentation here: http://chibios.sourceforge.net/html/index.html

Giovanni

Then, the problem is under os\ports\RVCT\ARMCMx, it has STM32F1xx, STM32F4xx, STM32L1xx. There is no STM32F3xx.

what files should I import under port folder for STM32373C-EVAL?

[Giovanni]

Hi,

Look at the Makefiles of the F3 demos and find the "include" (there are several of them), those .mk files contain all paths you have to use in your project.

Giovanni